AnonSec Shell

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AnonSec Shell AnonSec Shell

Server IP : 20.75.53.88 / Your IP : 216.73.217.165 [ Reverse IP ]
Web Server : Apache
System : Linux VMRALP-3 4.4.0-256-generic #290~14.04.1-Ubuntu SMP Thu Jun 20 09:24:50 UTC 2024 x86_64
User : www-data ( 33)
PHP Version : 5.5.9-1ubuntu4.29+esm15
Disable Function : pcntl_alarm,pcntl_fork,pcntl_waitpid,pcntl_wait,pcntl_wifexited,pcntl_wifstopped,pcntl_wifsignaled,pcntl_wexitstatus,pcntl_wtermsig,pcntl_wstopsig,pcntl_signal,pcntl_signal_dispatch,pcntl_get_last_error,pcntl_strerror,pcntl_sigprocmask,pcntl_sigwaitinfo,pcntl_sigtimedwait,pcntl_exec,pcntl_getpriority,pcntl_setpriority,
Domains : 3 Domains
MySQL : ON | cURL : OFF | WGET : ON | Perl : ON | Python : ON | Sudo : ON | Pkexec : ON
Directory : /var/www/disk_so_ralp/etc/snmp/

Upload File :

[ HOME ] [ BACKUP SHELL ] [ JUMPING ] [ MASS DEFACE ] [ SCAN ROOT ] [ SYMLINK ]

Current File : /var/www/disk_so_ralp/etc/snmp/mib2c.emulation.conf

############################################## -*- Mib2c -*-
##
## File   : mib2c.emulation.conf
## Author : Robert Story <rstory@freesnmp.com>
## Purpose: A mib2c conf file to generate snmpd.conf configuration to
##          provide basic/simplistic emulation for a particular MIB.
##
## 
## $Id$
######################################################################
@open ${name}-emulation.conf@
#
# $name.module MIB emulation
# Base OID: $name.objectID
#
# Requirements: Net-SNMP 5.2 or greater
#
# This file can be used as (part of) a Net-SNMP snmpd.conf
# configuration file to emulate (in a minimal fashion) the objects defined
# in the $name MIB.
#
# It is important to note that this file merely creates dummy values
# and variables and does not implement any of the functionality which
# the mib objects are actually supposed to implement!
#
# Also, it just defaults to 0, '' or 0.0 for initial values, so you'll need
# to tweak all the vaules. For any tables, you'll have set any indexes.
#
# The configuration tokens used in this file are documented in the
# snmpd.conf manual page, with the exception of the first line, which
# is documented in the snmp.conf and snmp_config manual pages.
#
#
# To use this file, you have several options:
#
#   1) add the contents to your existing snmpd.conf file
#   2) copy it to a new snmpd.conf, somewhere in SNMPCONFPATH
#   3) copy it to snmpd.conf.local, somewhere in SNMPCONFPATH
#
# The command 'net-snmp-config --snmpconfpath' will give your the
# SNMPCONFPATH (5.3.x and later).


# Here we tell the agent to load the MIB, so we can use names instead
# of OIDs. You may need to add other MIBs that this MIB depends on.
# Also, you might want to consider adding these to the global snmp.conf,
# so all users can reference them.
#
# See the Net-SNMP FAQ for more information on MIB loading.
#
[snmp] mibs +$name.module

#
# $name Scalar variables
#

@foreach $node scalar@
@   print Scalar: $node@
# $node.module::$node.parent.$node($node.subid) [$node.syntax = $node.type]
@   if "$node.status" eq "Deprecated"@
# **** WARNING: deprecated object ****
@   end@
@if $node.enums == 1@
@    eval $m2c_evals = ""@
@    eval $m2c_first = 1@
@    foreach $e $v enum@
@        if $m2c_first == 1@
@            eval $m2c_first = 0@
@        else@
@            eval $m2c_evals = "$m2c_evals,"@
@        end@
@        eval $m2c_evals = "$m2c_evals $e($v)"@
@        if $node.hasdefval == 1@
@           if (("$node.defval" eq "$e") || ("$node.defval" eq "$v"))@
@              eval $m2c_evals = "${m2c_evals}*"@
@           end@
@        end@
@    end@
# Enum range: $node.enumrange. Values: $m2c_evals
@elsif $node.ranges == 1@
@    eval $m2c_range_max = 0@
@    eval $m2c_evals = ""@
@    eval $m2c_first = 1@
@    foreach $a $b range $node@
@        if $m2c_first == 1@
@            eval $m2c_first = 0@
@        else@
@            eval $m2c_evals = "$m2c_evals,"@
@        end@
@        if $a == $b@
@            eval $m2c_evals = "$m2c_evals $a"@
@        else@
@            eval $m2c_evals = "$m2c_evals $a - $b"@
@        end@
@        eval $m2c_range_max = max($m2c_range_max,$b)@
@    end@
# Ranges: $m2c_evals;
@end@ #ranges
@   if $node.hasdefval == 1@
@      eval $m2c_emu_def = "$node.defval"@
@   else@
#  (no default value)
@      if "$node.type" eq "ASN_OCTET_STR"@
@         eval $m2c_emu_def = "''" @
@      elsif "$node.type" eq "ASN_OBJECT_ID"@
@         eval $m2c_emu_def = "0.0" @
@      else@
@         eval $m2c_emu_def = "0" @
@      end@
@   end@
##  uggh.. try to convert type into something 5.3.x override understands
@   eval $m2c_emu_type = lc($node.type)@
@   perleval $vars{'m2c_emu_type'} =~ s/asn_//; 0;@
@   if $node.settable@
#override -rw ${node}.0 $m2c_emu_type $m2c_emu_def
@   else@
#override ${node}.0 $m2c_emu_type $m2c_emu_def
@   end@

@end@


##======================================================================
#
# Note that in tables, all indices are shown first, then each
# readable column. This results in indices being given twice.
#
@foreach $node table@
@   print Table: $node@
# $node.module::$node.parent.$node($node.subid)
table $node
##============================================================
@   eval $m2c_idx_def = ""@
@   eval $m2c_add_def = ""@
@   foreach $col index@
# [$col] ($node.accessible) $col.syntax / $col.type / $m2c_decl ($col.decl)
@      if $col.enums == 1@
@          eval $m2c_evals = ""@
@          eval $m2c_first = 1@
@          foreach $e $v enum@
@              if $m2c_first == 1@
@                  eval $m2c_first = 0@
@              else@
@                  eval $m2c_evals = "$m2c_evals,"@
@              end@
@              eval $m2c_evals = "$m2c_evals $e($v)"@
@              if $col.hasdefval == 1@
@                 if (("$col.defval" eq "$e") || ("$col.defval" eq "$v"))@
@                    eval $m2c_evals = "${m2c_evals}*"@
@                 end@
@              end@
@          end@
#      enum range: $col.enumrange. Values: $m2c_evals
@      elsif $col.ranges == 1@
@          eval $m2c_range_max = 0@
@          eval $m2c_evals = ""@
@          eval $m2c_first = 1@
@          foreach $a $b range $col@
@              if $m2c_first == 1@
@                  eval $m2c_first = 0@
@              else@
@                  eval $m2c_evals = "$m2c_evals,"@
@              end@
@              if $a == $b@
@                  eval $m2c_evals = "$m2c_evals $a"@
@              else@
@                  eval $m2c_evals = "$m2c_evals $a - $b"@
@              end@
@              eval $m2c_range_max = max($m2c_range_max,$b)@
@          end@
#      ranges: $m2c_evals;
@      end@ #ranges
@      if $col.hasdefval == 1@
@         eval $m2c_col_def = '$col.defval'@
@      else@
@         if "$col.type" eq "ASN_OCTET_STR"@
@            eval $m2c_col_def = "''" @
@         elsif "$col.type" eq "ASN_OBJECT_ID"@
@            eval $m2c_col_def = "0.0" @
@         else@
@            eval $m2c_col_def = "0" @
@         end@
@      end@
@      eval $m2c_add_def = "$m2c_add_def $m2c_col_def"@
##@      if $node.accessible == 1@
@         eval $m2c_idx_def = "$m2c_idx_def $m2c_col_def"@
##@      end@
@   end@ ## col
##===================================================
@   foreach $col nonindex@
# $col [$col.syntax = $col.type]
@      if "$col.status" eq "Deprecated"@
# **** WARNING: deprecated object ****
@      end@
@      if $col.enums == 1@
@          eval $m2c_evals = ""@
@          eval $m2c_first = 1@
@          foreach $e $v enum@
@              if $m2c_first == 1@
@                  eval $m2c_first = 0@
@              else@
@                  eval $m2c_evals = "$m2c_evals,"@
@              end@
@              eval $m2c_evals = "$m2c_evals $e($v)"@
@              if $col.hasdefval == 1@
@                 if (("$col.defval" eq "$e") || ("$col.defval" eq "$v"))@
@                    eval $m2c_evals = "${m2c_evals}*"@
@                 end@
@              end@
@          end@
#      enum range: $col.enumrange. Values: $m2c_evals
@      elsif $col.ranges == 1@
@          eval $m2c_range_max = 0@
@          eval $m2c_evals = ""@
@          eval $m2c_first = 1@
@          foreach $a $b range $col@
@              if $m2c_first == 1@
@                  eval $m2c_first = 0@
@              else@
@                  eval $m2c_evals = "$m2c_evals,"@
@              end@
@              if $a == $b@
@                  eval $m2c_evals = "$m2c_evals $a"@
@              else@
@                  eval $m2c_evals = "$m2c_evals $a - $b"@
@              end@
@              eval $m2c_range_max = max($m2c_range_max,$b)@
@          end@
#      ranges: $m2c_evals;
@      end@ #ranges
@      if $col.hasdefval == 1@
@         eval $m2c_col_def = '$col.defval'@
@      else@
@         if "$col.type" eq "ASN_OCTET_STR"@
@            eval $m2c_col_def = "''" @
@         elsif "$col.type" eq "ASN_OBJECT_ID"@
@            eval $m2c_col_def = "0.0" @
@         else@
@            eval $m2c_col_def = "0" @
@         end@
@      end@
@      eval $m2c_add_def = "$m2c_add_def $m2c_col_def"@
@   end@ ## col
#add_row $node $m2c_idx_def $m2c_add_def

@end@ ## table

Anon7 - 2022
AnonSec Team